Your shopping cart is empty.

$ 39.99
Is your FutureSaw or X-Series hoverboard balancing on its own where one or both blue lights are stuck on? The problem you have is faulty foot sensors that are underneath the pads (although the repair itself is not so easy!). To fix the problem of having a blue light stuck on your FutureSaw...
Sold Out
(This page needs new original content) Hoverboard Kart for Sale This is the highest quality hoverkart available on the market! We too extra time to ensure that it will not break apart or cause other problems associated with the first generation hoverboard go karts. Therefore, this product is expected to...
SALE
$ 119.99 $ 129.99
Jetech 25.2v JT-BC204 hoverboard battery replacement. Jetech E490509 Hoverboard battery. Jetech E4828090509 Hover Board battery. 25.2v JETECH: VERIFY SIZE We've had a couple people order our battery, but have it not fit because they have a version that is smaller than the traditional 4AH we sell. Make sure to check before ordering or...
Sold Out
These hoverboard frames are made of aluminum and fit 6.5in, 8in,10in and 8.5in off-road scooter sizes.  All our parts are certified and ship from the U.S.A.
Sold Out
Please send us a picture of the internals of your device BEFORE you order this item. Compatibility is not guaranteed. Not all gyros will work with all hoverboards. Send your pictures to [email protected]. Remove the headache and send us a picture of the inside so we can guarantee compatibility. You...
Sold Out
Replacement battery for 10S1 2.5Ah 36v batteries used in many self balancing scooters. Please view the picture of the battery and compare it to yours to ensure fitment. This battery will replace those that look the same as the image on this page.
$ 149.99
This is a direct replacement for the black battery pack as shown in the images. It will be sold
Sold Out
If your pedals are broken or torn, you can purchase these NEW PARTS and replace them easily.
Sold Out
Handle bars for the 6.5in or 10in hoverboards and self balancing scooters. Can be shortened or lengthened to 3 different lengths.
SALE
$ 9.99 $ 14.99
Protect your investment with rubber bumpers that go onto the shell above the wheels. These bumpers are easily applied with the included 3M tape.
$ 9.99
This kit comes with two front LED's and two indicator LED's. These lights are easy to install and work with 6.5in, 8in, and 10in scooters. All our parts are certified and ship from the U.S.
$ 9.99
For 6.5in self balancing scooters. Choose the one that matches your board by looking closely at the pins in the pictures. Type 1 has 3 small mounting pins. Type 2 has 2 medium sized mounting pins.
Sold Out
DO NOT PURCHASE THIS REMOTE RECEIVER MODULE UNLESS YOU ARE FAMILIAR WITH SOLDERING AND OWN THE PROPER TOOLS. This modules gets installed on the side of your sensor board or gyro boards. See the pictures for more instructions. It is recommended that you would need to install this module on...
Sold Out
Plastic battery holder. This will fit: 6.5 Inch hoverboards 8 Inch hoverboards 10 inch hoverboards
$ 69.99
Replacement Hoverboard Shell When your hoverboard shell gets all scratched up or cracked, its probably time to get a new one. Choose from one of our many hoverboard shells below and you'll be riding in style once again! 10 Inch Hoverboard Shell The 10 inch hoverboard shell replacement is easier than...
$ 24.99
A hoverboard without working tires will take you nowhere. If your hoverboard tires are either flat or punctured, you will need to replace them. Without good tires, your hoverboard could face issues with stabilization as well as maneuverability. If your hoverboard feels shaky or imbalanced, then you should take a...
Sold Out
Have a flat hoverboard tire? Replace it with a new 10 inch hoverboard tube! Brand new tube for 10 inch wheel hoverboards. You will get one tube with your purchase. If you also punctured your tire, you'll want to buy a 10" x 2.125 hoverboard tire as well.  All our parts are certified and...
Sold Out
Replacement wheel/motor for 350w, 10 inch hoverboards and self balancing scooters. Your purchase comes with one wheel/motor with inflatable tire and tube as shown in the picture. The motor is contained within the rim. See the video below for a guide on how to replace the wheel/motor of your scooter. All...
Sold Out
Replacement wheel/motor for 350w, 8in scooters. This kit comes with one wheel/motor. See the video below for a guide on how to replace the wheel/motor of your scooter. All our parts are certified and ship from the U.S. Here is how to change the wheels:
Sold Out
Replacement wheel/motor for 350w, 6.5in (not 8 inch) hoverboard with the aggressive fan blade design. Similar to the 8 inch hoverboard wheel, this comes with one wheel/motor that fits the 6.5in hoverboard. See the video below for a guide on how to replace the wheel/motor of your scooter. All our parts...
$ 19.99
A basic three-prong replacement hoverboard charger is 36v and fits all 36v hoverboards. If your hoverboard charger is broken, this is our base replacement. For a safer, more reliable, and better-built hoverboard charger, we suggest you buy a high-quality hoverboard charger. The high-quality charger is heavier duty and will last longer.  ...
$ 59.99
Your 6.5 inch hoverboard shell is part of a product that is bound to get scratched. When its time to for a hoverboard outer shell replacement, you'll want to make sure you're buying quality. There's two choices when it comes to upgrading your hoverboard's case. The first choice is to replace the...
Sold Out
The best way to prevent and cover up scratches is by using a 6.5" silicone cover. This cover installs directly on top of your current hoverboard shell. The silicone material acts similar to that of a cell phone cover. It protects from scratches, as well as covering them up. All products are...
Sold Out
Replacement wheel/motor for 350w, 6.5in scooters with the flower design. Includes one wheel/motor.  Please select the design type that matches your scooter before adding the tire to your cart. See the video below for a guide on how to replace the wheel/motor of your scooter. All our parts are certified and ship from the...
$ 69.99
Hoverboard shells get scratched over time. When that happens you may want to replace the shell or buy a 8 inch silicone cover to cover them up. Choose from a wide variety of colors. Please be sure that the shell fits your hoverboard before buying. These shells fit the 8 inch...
Sold Out
The LED light covers for the 8 inch hoverboards sometimes fall off or their glue isn't strong enough to keep them together. This is a replacement plastic piece that goes above the RGB LED lights above the wheels on "Lambo" hoverboards. Comes as a set of two.
Sold Out
Replacement wheel/motor for 400w, 8.5in all-terrain hoverboards. Buy this if your off-road hoverboard motor isn't working or is spinning out of control. Compatible with Popular Models: EpikGo Halo Rover StreetSaw RockSaw Comes with on wheel in the design that you see in the picture. See the video below for a...
$ 34.99
Replacement bluetooth module for 6.5", 8", and 10" scooter with bluetooth. Comes with speaker. The mainboard must come with the tiny black and red power cables, otherwise it won't work unless you solder wires on yourself (we can provide these wires). We highly recommend checking your motherboard and sending us a picture of...
$ 99.99
This hoverboard battery replacement will fit most hoverboards, especially those from 2015 to 2018. This is a basic battery and contains standard lithium-ion cells wrapped in heat shrink film. This battery will last for around 300 charges before it degrades to a level where it may need to be replaced so...
$ 39.99
Please open your scooter and make sure this is the plug you need before buying this charging port. This is 2 Wire charging port for 3-pin electric scooters is normally used in black circuit kits but may also fit other color circuits. You should buy this plug if you charging port is broken,...
$ 19.99
Charger stuck in hoverboard? Wires to the charging port cut? No worries, a fix is easy with our replacement power charging port. Picking the Correct 3-Prong Charger Port There is a white clip at the end of your hoverboard charger port that clips into the mainboard. This white clip has a small piece...
Sold Out
Replacement kit for Dual-Board system scooters. Dual Board systems don't have a main logic board, instead, the circuitry is embedded on both balance sensor boards. This system works for the majority of scooters, but if you aren't sure you can always contact us. Below is a video guide that shows...
Sold Out
This cable is used to convert the FEMALE plug gyroscope balance sensor board in a MALE plug gyroscope balance sensor board. Simply plug it in to the FEMALE plug of the sensor board and connect the other end to the Mainboard. Includes 1 cable only.
Sold Out
This black hoverboard battery with Samsung cells is built with safety in mind. The worry of fires and hoverboards exploding prompted the need for a change in the way hoverboard battery packs were made. This is the point in time when black hoverboard batteries with had plastic shells were introduced. These batteries are...
Sold Out
This is a replacement battery for the X-Series hoverboard. This battery has a unique shape to it and is specifically made for the X-series. Popular models of the hoverboard are the StreetSaw FutureSaw, Skque X1, and more. Buy this replacement battery if your hoverboard is not holding a charge anymore. A...
$ 9.99
Traveling soon? Buy a global travel wire for your hoverboard and keep it charged no matter which country you're in. This is for the wire only and does NOT include the charger block for the hoverboard. The end of each wire corresponds to the specific area that it is designated for....
$ 59.99
A replacement hoverboard charger is the most reliable way to get your hoverboard working again. This new hoverboard charger has gone through rigorous inspections and will safely stop charging your battery once it has detected the battery is fully charged. Your hoverboard battery should last longer and charge much safer, ensuring that your hoverboard will last...
$ 39.99
Please open your scooter and make sure this is the plug you need before buying this 2-wire charging port. This is 2 wire charging port for dual board system electric scooters. You should buy this plug if you charging port is broken, missing pins, missing wires, or other physical damages. Do not buy...
$ 89.99
Universal hoverboard circuit board kit for use with 6.5 inch, 8 inch and 10 inch self balancing scooter models. This kit is for scooters with one main board and two sensor boards. Works with most scooters. Watch the video below to see how easy repair can be. All our parts are...
Sold Out
Replaces the dual board kits in many hoverboards such as CHIC and High Roller. This circuit board repair kit includes all necessary parts to replace broken two board circuits. Brand TaoTao White Clip Size: Wide Clip 2x Gyro board circuits (36v) 1x Bluetooth module 1x Speaker 1x Bluetooth connector wire...
Sold Out
Why spend the extra money and countless hours of time pulling your old hoverboard shell apart, only to find that its a lot harder than you expected, and you're really not sure what you're doing? There's a better (and cheaper) way! Instead of buying a new hoverboard shell, buy a hoverboard...
$ 19.99
I will diagnose problems with your hoverboard and tell you how to fix it (up to 4 replies). Order a hoverboard diagnosis if you have a broken hoverboard and aren't sure what is wrong with it. We have diagnosed thousands of hoverboard problems since we began in 2015. Ordering a diagnosis...
Sold Out
Have an X-series hoverboard that snapped in half? Get our hoverboard frame replacement for X-series made to withstand more weight, and build from high intensity aircraft grade aluminum alloy. X-Series Hoverboard Frame Fitment In 2016 a new hoverboard model came out that became quite popular. Many people in the industry nicknamed...
$ 9.99
These mounts go underneath the gyroscope sensor boards for electric scooters. These mounts are compatible with the 3-pc circuit board systems that include two gyroscope circuits and a mainboard. You will receive one (1) mount with each qty ordered. Order two pcs if you need a set of two plastic...
Sold Out
Hoverboards are often heralded as transportation of the future, and that is in no small part to the gyroscope technology used behind making a hoverboard work. The hoverboard gyroscopes allow users to maintain balance automatically, while also allowing for movement forward, backward, and essentially side-to-side. This motion happens when the foot...
Sold Out
This basic hoverboard kart is a great place to start for those who have just bought a new hoverboard. Quick and easy installation will get your rider on the road in no time! Looking for a better model? We sell a high-quality hoverboard kart with stronger steel that is built to...
Sold Out
This hoverboard kart is specifically made for drifting. This is a fun new way to use a hoverboard attachment that can really enhance the experience of riding a hoverboard on a seat. Shock absorbers are built into this model for extra comfort while you shred. Works great in the dirt, grass,...
Sold Out
Replace your broken hoverboard seat with a new one! Back by popular demand, we are now selling just the seat for various hoverboard kart styles.  We've heard your feedback! Over time the original hover board seat will get beat up or break from crashing etc. Put a new hoverboard seat on...
Sold Out
Replace your broken hoverboard seat with a new one! Back by popular demand, we are now selling just the seat for various hoverboard kart styles. This hoverboard seat comes in the color black unless otherwise requested. We can special order other colors such as pink, blue and red. Special requests please add...
Sold Out
Blue circuit board repair kit for 6.5in, 8in and 10in scooters (or any 350w hoverboard). Bluetooth is available in this kit.  All our parts are certified and ship from the U.S.   Parts included in this kit: 1x Main circuit (logic) board 2x Balance circuit boards 2x Front LED lights 2x Indicator...
Sold Out
This new black hoverboard repair kit for 2019 comes with the necessary motherboard and gyroscopes to fix most hoverboard problems. Featuring auto-balancing technology and a low price, use this kit for 6.5-inch, 8-inch, and 10-inch hoverboards. All our parts are certified and ship directly from the U.S. As amazing as a hoverboard is, it...
Sold Out
Use this universal hoverboard repair kit to replace green sensor boards on your hoverboard that have the T logo on them. The T logo on the sensors almost looks like two "L's" back to back. This logo stands for TaoTao, one of the highest quality sensor brands for hoverboard technology....
Sold Out
This is a repair kit for DUO Series electric scooters that contain two batteries. Please compare pictures to ensure you are getting the correct kit. If you are unsure, feel free to email us a picture of your hoverboard to [email protected] Please be aware that this repair is difficult and it...
Sold Out
This is a repair kit for X-Series electric scooters. Please compare pictures to ensure you are getting the correct kit. If you are unsure, feel free to email us a picture of your hoverboard to [email protected] Please be aware that this repair is difficult and it will require time and...
Sold Out
Repair Kit for 6.5in, 8in and 10in scooters (or any 350w hoverboard). Bluetooth is included in this kit. See the video below for a step-by-step installation guide.  All our parts are certified and ship from the U.S.   Parts included in this kit: 1x Main circuit (logic) board 2x Balance circuit...
Sold Out
TaoTao is one of the highest quality hoverboard sensor brands you can buy. The hoverboard circuit boards by TaoTao also feature Bluetooth and a speaker to play your favorite music. Our TaoTao hoverboard sensor repair kit works for most 6.5-inch, 8-inch, and 10-inch hoverboards. Watch the video below to see how...
Sold Out
Repair Kit for most 6.5in, 8in and 10in scooters. Bluetooth is included in this kit.   Parts included in this kit: 1x Main circuit (logic) board 1x Balance circuit board with bluetooth module 1x Balance circuit board with remote module 1x Remote control 2x Front LED lights 2x Indicator LED lights...
Sold Out
Lose some screws? Don't worry, we have you covered with these replacement screws for your scooter. Included are: 12x large coarse thread screws for the plastic housing 8x medium coarse thread screws for circuit board mounts / mainboard 4x small coarse thread screws for LED light mounting 12x fine thread...
Sold Out
This listing for 1x Mainboard and 2x Sensor board (one for each side). You can use the original LEDs, Power Button, and Charging port. This can be used to cure the following problems: One or both wheels not moving Two green lights in the middle Single flashing red light in...
$ 19.99
The reason behind how your hoverboard knows that you have stepped on it lies in its foot sensor triggers. The sensor triggers relay information to the motherboard when you step on the hoverboard by interfering with the flow of infrared light within the hoverboard. Basically, the sensor triggers cause a disruption...
$ 19.99
Replacement power switch for 6.5 inch, 8 inch, and 10 inch self balancing scooters. The power button comes with the most common 2-wire style (99% use this) as well as the washers and rings to properly tighten it. Easy to install - just watch the video of how to install a hoverboard power button...
$ 9.99
Use a remote control for hoverboard to control the scooter from a distance. With a remote, you can switch the hoverboard on and off, set an alarm, and change it into a 2nd mode that slows down the turning speed (so the rider can go faster more safely). If you do not...
Sold Out
Replacement main logic board for most hoverboard models. This board is Bluetooth capable and works with most scooter frames (6.5 inch, 8 inch and 10 inch). This is the mainboard with bright green plugs for the motor connections. NOTE: We do not recommend changing the mainboard by itself. We recommend you change the balance circuits along...
Sold Out
Two bright and colorful RGB LED light strips that are designed to stick to the bumper just above the wheel on 8in scooters. Some 6.5in and 10in scooters are also compatible with these lights depending on the model (you can check for yourself by comparing the plugs on your current LED's...
Sold Out
WE ARE NO LONGER SERVICING HOVERBOARD REPAIRS AT THIS TIME. PLEASE REFER TO OUR FREE HOVERBOARD REPAIR GUIDES. Is your hoverboard broken? Have us repair your hoverboard for you with our professional hoverboard shop services. We fix hoverboards day in and day out and know exactly what we're doing. How Does the...
is added to your shopping cart.
Go to Cart
is added to your wishlist.
Go to Wishlist