If you purchased a mainboard or a kit replacement and you experience violent shaking or the hoverboard is going in reverse direction you should try the following steps. Please remain patient. Some wheels have different wiring inside, but the solution is easy and it is explained in this article and in the video at the end.
You should always try this combination of wire connections first for the 3 color separate wires. You must do this on both sides.
Let's call this COMBO#1:
YELLOW of the mainboard to YELLOW of the motor.
GREEN of the mainboard to GREEN of the motor.
BLUE of the mainboard to BLUE of the motor.
If that did not get your hoverboard to behave normal, continue on this list until you get to the right combo. There is 6 combinations available and only one will make the hoverboard behave normal. So let's find it.
COMBO#2:
GREEN of the mainboard to BLUE of the motor.
BLUE of the mainboard to YELLOW of the motor.
YELLOW of the mainboard to GREEN of the motor.
COMBO#3:
GREEN of the mainboard to BLUE of the motor.
BLUE of the mainboard to GREEN of the motor.
YELLOW of the mainboard to YELLOW of the motor.
COMBO#4:
GREEN of the mainboard to GREEN of the motor.
BLUE of the mainboard to YELLOW of the motor.
YELLOW of the mainboard to BLUE of the motor.
COMBO#5:
BLUE of the mainboard to BLUE of the motor.
YELLOW of the mainboard to GREEN of the motor.
GREEN of the mainboard to YELLOW of the motor.
COMBO#6:
YELLOW of the mainboard to BLUE of the motor.
BLUE of the mainboard to GREEN of the motor.
GREEN of the mainboard to YELLOW of the motor.
------------------------------------------------------------------------------------
