Time: 30-60 minutes
If the LED light on your generic two-wheel self-balancing scooter isn't working, it might be due to a loose connection or a faulty LED light. This guide will help you identify and resolve the issue. Before attempting any repair, make sure you have the necessary skills, tools, and understand the risks involved.
The most common cause for hoverboard LED lights not working is a loose connection or a faulty LED light component.
Reconnecting any loose wires and replacing the faulty LED light with a new one are the most effective solutions for fixing the issue.
To fix a hoverboard LED light that isn't working, check for loose connections and replace the faulty LED light component if necessary.
Step 1: Power off and disconnect the hoverboard
- Ensure the hoverboard is turned off and disconnected from the charger before proceeding.
- Image 1
Step 2: Open the hoverboard casing
- Use a screwdriver to remove the screws securing the hoverboard's casing and carefully open it.
- Image 2
Step 3: Inspect the LED light connection
- Locate the LED light and its connection to the hoverboard's motherboard.
- Check for any loose or disconnected wires.
- Image 3
Step 4: Reconnect or resolder the loose wires (if needed)
- If you find any loose or disconnected wires, reconnect them or use a soldering iron to resolder them in place.
- Image 4
Step 5: Replace the LED light (if required)
- If the issue persists and the LED light component is faulty, replace it with a new, high-quality LED light.
- Image 5
- Image 1: Hoverboard powered off and disconnected from the charger
- Alt-tag: Hoverboard turned off and disconnected
- Image 2: Opening the hoverboard casing
- Alt-tag: Opening hoverboard casing
- Image 3: Inspecting the LED light connection
- Alt-tag: Inspecting hoverboard LED light connection
- Image 4: Reconnecting or resoldering loose wires
- Alt-tag: Reconnecting or resoldering hoverboard LED light wires
- Image 5: Replacing the faulty LED light
- Alt-tag: Replacing hoverboard LED light