How to Replace Damaged Hoverboard Shell

Difficulty: Easy

Time: 30 minutes

Steps: 4

Words: 1054

Introduction

If you notice that your hoverboard's wheel fenders or covers are damaged, it might be time to replace the external shell. Damaged shells not only affect the appearance of your hoverboard, but they can also expose internal components to dust and debris, potentially causing further issues. This guide will walk you through the process of purchasing and replacing the shell of most two-wheel self-balancing scooters made in China. Be cautious and only follow this guide if you understand the risks involved.

Tools

• Phillips screwdriver
  • Amazon link placeholder
• Flathead screwdriver
  • Amazon link placeholder

Parts

• New hoverboard external shell
  • Amazon link placeholder

Top Cause

The most common cause of damaged wheel fenders or covers is the impact from accidents, collisions, or general wear and tear over time.

Top Solution

The most common solution is to purchase a new external shell compatible with your hoverboard model and replace the damaged one.

Summary

By replacing the damaged wheel fenders or covers, you can restore the appearance of your hoverboard and protect its internal components from potential damage. Regularly inspect your hoverboard for signs of wear and tear, and replace parts as needed.

Step-by-Step Guide

Step 1: Purchase a new external shell

First, find a compatible external shell for your hoverboard model. Make sure the shell fits the size and design of your specific hoverboard. You can find replacement shells on Amazon or other online retailers.

• Image 1: New hoverboard shell

Step 2: Disassemble the hoverboard

1. Power off the hoverboard and disconnect the charger.
2. Turn the hoverboard upside down, so the wheels face upwards.
3. Use a Phillips screwdriver to remove all the screws securing the top and bottom shell together. Keep the screws in a safe place for reassembly.

• Image 2: Removing the screws

Step 3: Replace the damaged shell

1. Carefully lift the top shell off the hoverboard, revealing the internal components.
2. Disconnect any connectors or cables attaching the shell to the hoverboard.
3. Use a flathead screwdriver to gently pry the wheel fenders or covers from the hoverboard frame.
4. Replace the damaged shell with the new one, ensuring it aligns correctly with the frame and internal components.
5. Reconnect any connectors or cables that were disconnected earlier.

• Image 3: Replacing the damaged shell

Step 4: Reassemble the hoverboard

1. Carefully place the top shell back onto the hoverboard, ensuring all connectors and cables are properly seated.
2. Align the screw holes and use the Phillips screwdriver to reattach the top and bottom shells with the screws you removed earlier.
3. Turn the hoverboard right-side up and power it on to ensure everything is functioning properly.

• Image 4: Reassembling the hoverboard

Conclusion

By following this guide, you have successfully replaced the damaged wheel fenders or covers on your hoverboard. This not only improves the appearance of your hoverboard but also helps protect its internal components. Keep an eye on the condition of your hoverboard and replace parts as needed to ensure optimal performance.

Images

• Image 1: New hoverboard shell
  • Alt-tag: New hoverboard external shell
• Image 2: Removing the screws
  • Alt-tag: Unscrewing hoverboard shell
• Image 3: Replacing the damaged shell
  • Alt-tag: Replacing damaged wheel fenders with a new shell
• Image 4: Reassembling the hoverboard
  • Alt-tag: Reassembling hoverboard after replacing the shell

Image 1

• Display a new hoverboard external shell on a white background.
• Camera angle: Top view

Image 2

• Show a hoverboard turned upside down with the wheels facing up.
• Display hands using a Phillips screwdriver to remove screws from the hoverboard.
• Camera angle: Side view, slightly above

Image 3

• Show the hoverboard with the top shell removed, revealing internal components.
• Display hands gently prying the wheel fenders or covers off the frame and replacing them with a new shell.
• Camera angle: Side view, slightly above

Image 4

• Show the hoverboard with the new shell in place.
• Display hands using a Phillips screwdriver to reattach the screws.
• Camera angle: Side view, slightly above