Your shopping cart is empty.

$ 9.99
This kit comes with two front LED's and two indicator LED's. These lights are easy to install and work with 6.5in, 8in, and 10in scooters. All our parts are certified and ship from the U.S.
$ 34.99
Replacement bluetooth module for 6.5", 8", and 10" scooter with bluetooth. Comes with speaker. The mainboard must come with the tiny black and red power cables, otherwise it won't work unless you solder wires on yourself (we can provide these wires). We highly recommend checking your motherboard and sending us a picture of...
$ 39.99
Please open your scooter and make sure this is the plug you need before buying this charging port. This is 2 Wire charging port for 3-pin electric scooters is normally used in black circuit kits but may also fit other color circuits. You should buy this plug if you charging port is broken,...
$ 19.99
Charger stuck in hoverboard? Wires to the charging port cut? No worries, a fix is easy with our replacement power charging port. Picking the Correct 3-Prong Charger Port There is a white clip at the end of your hoverboard charger port that clips into the mainboard. This white clip has a small piece...
Sold Out
Replacement kit for Dual-Board system scooters. Dual Board systems don't have a main logic board, instead, the circuitry is embedded on both balance sensor boards. This system works for the majority of scooters, but if you aren't sure you can always contact us. Below is a video guide that shows...
$ 39.99
Please open your scooter and make sure this is the plug you need before buying this 2-wire charging port. This is 2 wire charging port for dual board system electric scooters. You should buy this plug if you charging port is broken, missing pins, missing wires, or other physical damages. Do not buy...
$ 89.99
Universal hoverboard circuit board kit for use with 6.5 inch, 8 inch and 10 inch self balancing scooter models. This kit is for scooters with one main board and two sensor boards. Works with most scooters. Watch the video below to see how easy repair can be. All our parts are...
Sold Out
Replaces the dual board kits in many hoverboards such as CHIC and High Roller. This circuit board repair kit includes all necessary parts to replace broken two board circuits. Brand TaoTao White Clip Size: Wide Clip 2x Gyro board circuits (36v) 1x Bluetooth module 1x Speaker 1x Bluetooth connector wire...
$ 9.99
These mounts go underneath the gyroscope sensor boards for electric scooters. These mounts are compatible with the 3-pc circuit board systems that include two gyroscope circuits and a mainboard. You will receive one (1) mount with each qty ordered. Order two pcs if you need a set of two plastic...
Sold Out
Use this universal hoverboard repair kit to replace green sensor boards on your hoverboard that have the T logo on them. The T logo on the sensors almost looks like two "L's" back to back. This logo stands for TaoTao, one of the highest quality sensor brands for hoverboard technology....
Sold Out
Repair Kit for 6.5in, 8in and 10in scooters (or any 350w hoverboard). Bluetooth is included in this kit. See the video below for a step-by-step installation guide.  All our parts are certified and ship from the U.S.   Parts included in this kit: 1x Main circuit (logic) board 2x Balance circuit...
Sold Out
TaoTao is one of the highest quality hoverboard sensor brands you can buy. The hoverboard circuit boards by TaoTao also feature Bluetooth and a speaker to play your favorite music. Our TaoTao hoverboard sensor repair kit works for most 6.5-inch, 8-inch, and 10-inch hoverboards. Watch the video below to see how...
$ 19.99
The reason behind how your hoverboard knows that you have stepped on it lies in its foot sensor triggers. The sensor triggers relay information to the motherboard when you step on the hoverboard by interfering with the flow of infrared light within the hoverboard. Basically, the sensor triggers cause a disruption...
$ 19.99
Replacement power switch for 6.5 inch, 8 inch, and 10 inch self balancing scooters. The power button comes with the most common 2-wire style (99% use this) as well as the washers and rings to properly tighten it. Easy to install - just watch the video of how to install a hoverboard power button...
Sold Out
Replacement main logic board for most hoverboard models. This board is Bluetooth capable and works with most scooter frames (6.5 inch, 8 inch and 10 inch). This is the mainboard with bright green plugs for the motor connections. NOTE: We do not recommend changing the mainboard by itself. We recommend you change the balance circuits along...
is added to your shopping cart.
Go to Cart
is added to your wishlist.
Go to Wishlist